Oil Plastic Bottle Blow Molding Machine 4 Layer 10L PE Bottle

D Type High Speed Single Station Plastic Bottle Blow Molding Machine with IML for Plastic Machine Oil Bottle​

SLD series:

1: this machine is suitable for the production of 200ML 10L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speedF aster, run more smoothly.

2: die opening and closing system: specially designed for Heng lock mould mechanism using a high pressure mode locking, locking plate stress in the centre of the template, clamping force, openThe rigid lock template, even if the ultra wide die is also fitted.

3: die head system: all the use of 38CRMOALA and other materials, the precision machining and heat treatment.

4: Operators should be experienced and qualified persons.
For maintenance or repair, you can contact our company or local offices for maintainers or you can invite experienced experts to maintain or repair the machine.
Persons who are not trained or certificated are prohibited to operate the machine.
Before operating the machine, education regarding the correct operation, maintenance and check of the machine should be provided to the operators.
If needed, the material safety data sheet should be retrieved from the material providers. Please follow the instruction of the providers.
When placing the machine, please make sure that there is safety distance between machine and machine, machine and wall. Please pay attention to the safety regarding electricity and water (including: cable specifications, fuse capacity, grounding, hydraulic pressure, water inlet and outlet setting, etc.).