2 Head 5L PE Jar Blow Moulding Machine Fully Automatic Blowing

U series High Speed 1 Layer Double Station 2 Die head Blow Molding Machine for Plastic Wide-mouth Bottles

SLBU series:

1: this machine is suitable for the production of 200ML -5L plastic hollow products.

2:The mode impact is controlled by the pressure on the slow frame and the buffered one-way throttle valve at the front end of the cylinder. When

there is impact sound on the upper shifting die, the pressure on the slow frame should be reset to reduce the pressure. The adjusting screw on

the flow valve is screwed clockwise and adjusted until the upper shifting mold has no impact sound. Pay attention to safety when adjusting the

upper die throttle valve. The pressure on the slow frame is also the pressure for manually moving the upper mold. If there is no manual

movement, the pressure on the slow frame can be set high. However, the pressure on the slow frame should be set low during fully automatic

operation. The general pressure analog quantity is set between 100 and 300.