5l EVA Fully Automatic Blow Moulding Machine ABS Bottle Water

Toggle type 2 layers double station 1 Die head Blow Molding Machine for 5L Plastic Water Kettle

SLBU series:

1: this machine is suitable for the production of 5L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speedF aster, run more smoothly.

2: In the temperature parameter setting screen, set the set value, the upper limit, the lower limit, the lower limit, and the control state of each temperature used. The setting method: just click on the value of the set value, the upper limit, the lower limit and the lower limit of each piece of temperature, a keyboard for inputting the value will be automatically popped up, click the value to be set, and then press the enter key to confirm the value and Store, click on the control status of each temperature used, and set it to the running status. After setting it, click the “Back” button to control the main screen. Click the "warm" button and open the automatic air switches in the box one by one, so that the barrel and the die start to warm up.