3 Head High Speed Blow Molding Machine Pharmaceutical Bottle 65mm Fully Automatic Blowing

High Speed 3 Die Heads Blow Molding Machine for Plastic Pharmaceutical Bottle

SLBU series:

1: this machine is suitable for the production of 200ML- 5L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speed faster, run more smoothly.Servo Hydraulic System includes Servo Head Lifting, Servo Die Head, Servo Parison Control System.

2. The running time of the two mold frames is inconsistent (the difference is too large). If the flow rate of the material pipe is downward, the time difference between the two sides of the left and right mold frames is large, and the weight of the two sides is unstable. The mold frame runs faster and the weight is heavier, and the mold frame runs slower because of the lighter weight. The solution is to adjust the two side mold bases to make the running time close.

3. The extrusion amount is unstable, and the extrusion amount is unstable due to the unstable rotation speed of the motor and the unsuitability of the lightness of the belt.