PE High Speed Blow Molding Machine Clamping 1 Head Milk Bottle

U series Double Station High Speed 1 Layer 1 Die Head Blow Molding Machine for Plastic Milk Bottle

1: this machine is suitable for the production of 5L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speed faster, run more smoothly

2: The micro switch detection is mainly composed of three parts: the blowing position, the moving position and the opening and closing position.

Blowing needle position detection: The detecting component is a proximity switch for signaling the lower die shifting action to protect the needle blowing mechanism and the needle blowing head.

Mode shift position detection: The detection component is four proximity switches, which are the lower shift mode end point, the lower shift mode slow speed, the upper shift mode slow speed, and the upper shift mode end point. The slow speed limit is used to adjust the movement effect of the shift mode. The end point limit is used to signal the next step.

Open and close mode position detection: The detection component is three micro-switches, which are the end of mold opening, the slow mode of clamping, and the end of clamping. The slow limit is used to adjust the action of slow clamping and reduce the closing end of the clamping. When the impact on the mold, the end limit is used to signal the next step.