120l Accumulator Blow Moulding Machine High Speed Pumpkin Toy Blow Molding Machine

1 Die Head Accmulator Type Single Station Plastic Blow Molding Machine For Plastic Pumpkin Toys

SLBC series: (German model)

1: linear guide support single frame, finite element analysis of the design, to ensure adequate clamping force, not up mode.

2: large opening stroke, central locking, locking force equilibrium, no deformation.with user-frendly PLC.

Before the new machine is turned on, the fuel tank is filled with hydraulic oil. When the hydraulic oil is filled, the hydraulic oil must be filtered first.

When starting the oil pump for the first time, first open the oil inlet ball valve, then loosen the pressure adjustment screw of the proportional relief

valve, adjust the pressure to the minimum, and loosen the bleed screw on the proportional relief valve to start the oil pump. After 2-3 hours of no-

load operation, tighten the bleeder screw on the proportional relief valve and tighten it with the pressure adjustment screw to adjust the system

pressure to the working state.