Single Station Automatic HDPE Bottle Blow Molding Machine

Single Station One Head Blow Molding Machine for Plastic Furniture with Parison System 

SLBC series: (German model)

1: linear guide support single frame, finite element analysis of the design, to ensure adequate clamping force, not up mode. All parts of the

machine is made by advanced numerical control equipment with high precision. 

2 Note:

(1)The cooling water of the oil cooler should be provided before the machine starts working.

(2) When the work of the blow molding machine machine finishes, please stop providing cooling water and drain the cooling water. In areas

whose winter is biting cold, cooling water should keep circulating under low pressure when the machine is shut down(if the cooling water freezes,

please drain the cooling water and then use compressed air to drain the remaining water so as to prevent the oil cooler and other equipment from

being damaged).

(3) Please select soft water (mineral-free) as cooling water. In general, the water from wells contains a lot of mineral. Please equip a filter and

clean the cooling water pipes and cooling tower often to avoid sediments which can reduce the cooling efficiency.