Single Station Accumulator Blow Moulding Machine For 200L Chemical Stacking Bucket

High Speed Accumulator Blow Moulding Machine For 200L Chemical Stacking Bucket

SLBC series: (German model)

1:Fully Automatic Blow Moulding Machine, large opening stroke, central locking, locking force equilibrium, no deformation. All parts of the machine is made by advanced numerical control equipment with high precision. 

2:Fully Automatic Blow Moulding Machine, The electronic control system consists of operation panel, touch display screen, temperature control module, PLC programmable controller, analog quantity, proportional board, contactor, regulated power supply, automatic air switch, intermediate relay, twisted material inverter, proximity switch, stroke Switch, cutter transformer, twisting motor, oil pump motor and so on.

Temperature parameter setting screen:

There are a total of one to four (or more) temperature control. For each parameter setting, just click on the number, a numeric input keyboard will pop up automatically, click the value to be set, and then press the enter key to confirm the value. With storage.

Set value: This value is set according to the raw materials used.

Current value: It means that the current temperature transmitted by the thermocouple is transmitted to the temperature control module, and then the temperature control module transmits to the PLC and finally to the value displayed on the touch screen.